All posts

Left chest logo size and placement

Short answer

A left chest logo is usually a few inches wide and a little less tall, placed below the shoulder seam on the wearer's left. Round emblems should be smaller than wordmarks. Making it too large is the common mistake, so test on a sample garment.

A polo shirt with a small embroidered flower on the left chest and dashed lines showing its position, a close-up of the flower, and a polo, a T-shirt and a hoodie with the same logo.

The left chest area is the most common placement for an embroidered logo; the most frequent mistake is making it too large. A logo that looks balanced on screen may turn out to be disproportionate once embroidered onto a polo shirt. This guide outlines standard sizes and measurements, helping you determine the appropriate dimensions before converting your design.

Standard size

Most guides recommend that a logo placed on the left chest be approximately 3 to 4 inches (7.5 to 10 cm) wide and 2 to 3 inches (5 to 7.5 cm) high. For T-shirts, a width of 3 to 3.5 inches (7.5 to 9 cm) is generally ideal. Many print shops consider any dimension exceeding about 4 inches (10 cm) in either width or height to be excessive.

The shape influences these dimensions:

  • Horizontal logo or wordmark: about 3.25 to 3.5 in wide (up to 4 in).
  • Round or square emblem: about 2.5 to 3 in wide.
  • Name or small text line: about 2 to 3 in wide.

A round crest carries more visual weight than a flat wordmark, so it looks bigger at the same width. That's why it needs to be smaller.

Placement: where to put it

Take the measurement to the center of the logo. The typical starting point is approximately 7 to 9 inches (18 to 23 cm) below the shoulder seam (where it meets the collar) and about 3 to 5 inches (8 to 13 cm) from the center line, on the left side of the person wearing the garment.

  • Men's polo or tee: 7 to 9 in down from the shoulder seam, about 4 in from the center.
  • Ladies' polo: 5 to 7 in down from the shoulder seam, centered between the placket and the sleeve.
  • Hoodie: 6 to 8 in down from the shoulder seam, 3 to 4 in from the center.

These are starting points, not laws. Always test on a sample garment before a large batch, and use a placement template or guide when production starts.

Things that change the numbers

  • Pockets and button plackets: Ensure that the logo is not positioned too close to the seams or the edges of the pockets. Some pocketed T-shirts may require a different placement.
  • Garment size: A child's or small-sized T-shirt requires a smaller logo, positioned higher up.
  • Hoop size: A standard left-chest design is often embroidered using a small hoop; many workshops limit left-chest designs to approximately 10 cm wide by 7 cm high.
  • Fabric: Lightweight or stretchy fabrics are more prone to distortion, especially on larger sizes. Choose a stabilizer appropriate for the specific fabric.

How size affects legibility

When reducing the size of a logo to fit the left chest area, the text is often the first element to cause issues. Sans-serif fonts generally need letters at least about 0.25 in (0.6 cm) tall, while script or serif fonts need more, around 0.3 in (0.8 cm). Refer to minimum text size in embroidery to ensure you follow all the guidelines, and consider using a simplified version of the logo for smaller placements.

Also, keep in mind that resizing a design significantly changes the number of stitches required. Therefore, resize the design first and then convert it, rather than stretching a finalized file.

Size, count and cost go together

A bigger left chest logo means more stitches and a higher price. Typical chest designs run around 7,500 stitches, though yours depends on the artwork. See stitch count and density and digitizing cost for how that affects your quote.

Check legibility at actual size

The simplest way to identify a logo that is too large or overly complex is to examine it at its actual size, without zooming in. Upload your PNG or JPG file to the converter on this site, set the desired width (try 3.5 inches, or approximately 8.9 cm), and preview every stitch before exporting. If any letter or line lacks clarity in the preview at this size, simplify it before it is embroidered onto the garment. Automatic results can need editing, so test-sew before a full run.

FAQ

What is the standard left chest logo size?

About 3 to 4 inches wide and 2 to 3 inches tall. For t-shirts, 3 to 3.5 inches wide is common.

Where should a left chest logo be placed?

Typically 7 to 9 inches down from the shoulder seam and 3 to 5 inches from the center line, measured to the center of the logo. Ladies' polos often sit a little higher.

Is a 5 inch logo too big for the left chest?

Usually yes. Many shops treat anything over about 4 inches wide or tall as too large.

Should round logos be smaller?

Yes. Round or square emblems usually look right at around 2.5 to 3 inches because they carry more visual weight.